Restrictions after battery replacement:

After replacing the battery, you’ll see “Service” and a message that your phone doesn’t have an original Apple battery in the battery status information on your device. This notification appears because iOS recognizes that the battery has been changed. But it doesn’t bother the iPhone, and the phone works just like it does with the original battery.

Two battery replacement options:

• Battery replacement on standby:
  • It usually takes around 15-30 minutes, depending on the specific model.
  • Cheaper replacement option.
  • Includes replacement of the entire battery including electronics.
  • After this replacement, the device will alert you when the battery has changed, but it does not affect the functionality or endurance of the device.
• Replacing the battery with authorization:
  • It requires rewiring the electronics from the original battery to the new cell.
  • More time-consuming repair, usually takes 2-3 hours.
  • Allows you to keep battery status information in the settings.
  • A more expensive option, but provides complete functionality and retains the ability to monitor battery condition in the settings.

3. Recommendation:

When it comes to choosing between speed and authorisation, it depends on personal preferences and priorities. If you want a fast and affordable replacement with minimal impact on functionality, a battery replacement on demand may be the optimal choice. Conversely, if you prefer complete retention of functionality and the ability to monitor battery status, replacement with authorization may be preferable, albeit with a longer duration and higher cost.

If you have any additional questions, please do not hesitate to contact us. here

You can follow us on Instagram

Your iPhone isn’t just a phone, it’s your connection to the world, family and friends. But when it falls into the water, it can be a real disaster. However, not all is lost! There are certain steps you can take to save your iPhone and bring it back to life.

First of all, if your iPhone falls into the water, don’t panic! Take the following steps as soon as possible to increase the chances of rescuing your device:

1. Turn off your iPhone immediately: This is a very important step. Immediately turn off your iPhone by holding down the power button/screen lock for a few seconds.
2. Remove the SIM card: remove the SIM card from the SIM card slot on your iPhone. This will prevent damage to the SIM card and simplify the process of recovering your iPhone after a drop in the water.
3. Remove water: try to remove as much water as possible from the iPhone. You can try shaking it or gently shaking it.
4. Dry the iPhone: After removing any visible water droplets, dry iPhone with a dry cloth to remove any remaining moisture.
5. Don’t put your phone in rice, it’s a myth. Although many people think that putting a drowned phone in rice can help fix it, this is actually not the case. This is because rice doesn’t absorb moisture enough to help by removing it from the device. In addition, the rice can leave tiny particles inside the phone, which can lead to damage to the components of the device.
6. Do not operate the iPhone until it is completely dry: This is an important step. Do not attempt to turn on your iPhone until it is completely dry.

If your iPhone still does not work after these steps, it may mean that some parts of your iPhone have been damaged. In this case, you will need a professional repair.

Fortunately, there are many companies that provide iPhone repair services after falling into the water. These professionals can assess the damage and make the necessary repairs to bring your iPhone back to life.

If you have performed the steps listed in the previous article, but your iPhone still does not work, this is a sign that there are more serious problems. In this case, it’s best to contact a professional service that specializes in repairing devices after falling into water.

Our experts are trained and have many years of experience in repairing iPhones after falling into water. We have state-of-the-art technology that allows us to quickly and efficiently diagnose the damage and make the repair.

Our services include the following:

1. Diagnostics:First, we will perform a thorough diagnosis of your equipment to determine the extent of the damage.
2. Cleaning: we will then clean your equipment using special tools and products. This will allow us to remove any moisture and prevent further damage.
3. Replacing damaged parts: if any parts of your iPhone are damaged, we will replace them with new parts.
4. Testing: Finally, we’ll run a series of tests to make sure your iPhone is working properly.

Our services are reasonably priced and quality assured. Because we know how important it is for you to have your iPhone back as soon as possible, we strive to be as fast as possible and complete the repair as soon as possible.

So if your iPhone is still not working, don’t hesitate to contact our professionals to help you. Contact us for more information about our services and pricing.

If you have any additional questions, please do not hesitate to contact us. here

You can follow us on Instagram

What is Face ID and how does it work

Before troubleshooting“Face ID doesn’t work“, it’s important to understand how the technology works in principle. Face ID is
consists of several sensors that are located on the front of the phone, in the so-called notch.
If you look closely at the notch, you can find not only the main camera, but also
several sensors:
– infrared illumination for object recognition at night or in insufficient
ambient lighting
– The infrared camera counts the point structure, produces an image in the infrared spectrum and then
sends the created information to Secure Enclave
– The dot projector projects more than 30,000 dots onto the face, guaranteeing accurate
iPhone owner recognition reliably and without errors.
The system produces a 3D image, which is then scanned to identify your face. Initially
there may be recognition problems if the hairstyle needs to be changed or there are other
factors, however, thanks to intelligent tools, Face ID quickly adapts to external
indicators and unlocks your iPhone, even if you grow a beard or put on a
sunglasses or a hat.

Which iPhone/iPad models support Face ID

Face ID is integrated into newer devices to improve user protection. Thanks to this
technology was able to improve security and make it easier to log in the owner through face scanning
in three-dimensional space. This feature not only protects your privacy better than scanning
fingerprint (Touch ID), but also allows you to make payments, start installing apps in
AppStore, etc. At the same time, its nature and ease of use makes it much more intuitive
to use than a fingerprint reader (Touch ID).
The Apple giant has introduced this feature in new iPhone models such as iPhone X / XR / XS
/ XS MAX, across the 11th version range (iPhone 11/11 Pro / 11 Pro Max), as well as in iPhone 12/12
Pro / 12 Pro Max / mini, but also in the iPad Pro series – Face ID is available in 11-inch
second-generation and 12.9-inch third- and fourth-generation iPad.
Why doesn’t Face ID work on my iPhone X?
Now we come to the topic: why Face ID stopped working. It should be noted right away that
there are several causes and solutions to the problem and all can be addressed either at home or
by taking the equipment to the workshop. Take iPhone X, for example, where Face ID has stopped
work.

When Face ID doesn’t work on iPhone X

Software error
If the device has no visual defects, there has been no contact with water, the phone has not been
stored for a long time in places with high humidity, but Face ID still stopped working, the solution
may be a firmware error or insufficient lighting or incorrect viewing angle.

What can you try to do in this case? Restart the system. Despite the fact that
iOS is considered the most reliable and stable firmware, like any other system, it is not
immune to occasional flaws and mistakes. A reboot can help load properly
all components of the operating system and load sensors and scanners together correctly
responsible for the proper operation of Face ID.
The operating system hasn’t been updated in a while
If the reasons listed above do not exist and Face ID still does not work on iPhone X, you need to
check iOS update. You can find this item in settings-general-software-update
and you should pay attention to it and always have the latest firmware version installed.
Important! When updating, the battery indicator must show at least 50% to give the iPhone time
correctly download and install all components of the update. We recommend using
stable internet connection. For example, if the choice is between LTE mobile internet
or 5G and Wi-Fi, it’s better to give preference to the second option, i.e. Wi-Fi.

Setting up Face ID correctly

Inexperienced users may set up Face ID incorrectly and then be confused, resulting in
of which face sensing on the iPhone X does not work, for example, Face ID may not work at all
turn on or cause scanning errors. So what needs to be done?
After you go to the settings menu and open the Face ID tab, they should be activated
all sliders that are highlighted in green. For Attention you need to be careful
and carefully read the warnings that come with this option.

Face ID doesn’t work

If Face ID doesn’t work after all of the above settings, you’ll need to do
reset Face ID. Resetting is simple and is located in the same menu. Resetting you
The iPhone will ask for a numeric password.
After resetting Face ID, you must set new parameters. This will protect your data and
also be able to pay by face scan only, without the need for additional passwords and PINs
bank cards. The procedure is as follows:
– go to settings
– click on Face ID and code and set Face ID
– click on Start which will start the scan, the smartphone camera should be in the right
at an angle to your face. Do not move or play with your facial expressions during the process so that the sensors
could create a 3D image of your face
– the repeated procedure contributes to more accurate face recognition in the future
If everything is done correctly, you will be notified that the process has been successfully completed
Now we’ll list a few other options that can prevent Face ID from working correctly
worked on iPhone X
– seasonal clothing-this happens especially often in winter, when we bundle up in scarves and hats.
These additions to our wardrobe can affect facial and camera legibility, which
is unable to scan and correctly recognize all the necessary points, resulting in
the result is that Face ID cannot unlock the iPhone. The solution, of course, is
simple-for a short period of time to remove these items of clothing and thus allow proper
facial scanning
– The same applies to the summer season, when users wear sunglasses, masks, hats, etc.
The solution may be an item in the Face ID-alternative appearance settings that will
must be set

– Face ID on iPhone doesn’t work because of the obstructed optics – except for the normal, accidental
covering your hands, a new case or new protective glass may cover the holes. If
the case or glass is of poor quality or does not match the iPhone model, it may
This will cause errors when scanning the face. Then you must choose only such
accessories that are compatible with your iPhone model and of better quality than you
they’ve had so far.

What to do if Face ID stops working on your iPhone

Have you tried all of the above but Face ID still doesn’t work on your iPhone? In that
in this case, it is appropriate to consider a technical problem and faulty hardware.
What are the symptoms:
– Face ID does not work reliably, the background is “like fog”
– Face ID doesn’t work or start – restarting the device didn’t solve the problem
– The screen says: Face ID is not available, please try again later
– When you try to add a face, the image is out of focus and it says: zoom out or
zoom in on the camera (or raise or lower it, depending on your iOS version).
If the device is under warranty, just contact your nearest authorised service centre and they will
will usually replace the iPhone with a new one. In other cases, you will need to contact such
a service that can fix the problem and specialises in this type of repair. In order to
repair done well and lasted a long time, you should contact a trustworthy
service that uses certified equipment and professional tools. Before you go to the workshop,
we recommend you read reviews of the service you are going to take your phone to.

Face ID not working after contact with liquid

Water intrusion inside the device has a devastating effect on all components in the iPhone. They oxidize
elements that become covered with corrosion and these cease to interact with the system. If you don’t apply
phone to the repair shop on time or you may not notice a soaking, even if it is slight, you may
over time, the individual contacts or the sensors as a whole are completely damaged.

So what to do if Face ID doesn’t work on my iPhone after contact with water? It is essential to make it as
first bring your iPhone to a repair shop to have it repaired and cleaned with special products,
which will remove the oxidation and the damaged components will be repaired.
The specialists at i-Fix carry out repairs using professional tools and technical
Equipment. You can contact us at any time for assistance to ensure that your equipment continues to
worked as it should. In our service price list you will find only reasonable prices without unnecessary
surcharges.
We always install only original parts or proven analogues that guarantee stability
functions of all components. So if your iPhone with Face ID doesn’t work after contact with water,
take it to our technicians who will try to repair it as soon as possible.

Face ID on iPhone doesn’t work after a crash

Often there is a crash after which Face ID does not work properly or does not turn on at all.
A familiar situation for many users of not only Apple devices, but also other brands. So what are
symptoms and what to look out for:
– the camera takes many times longer to start than usual
– Portrait mode does not blur the background or does not work at all
– A FaceTime call tells you that the camera is busy with another program,
even though you didn’t turn on anything else
– spontaneous switching on of a lamp that you have not clicked on
– truedepth camera is not working because it is physically broken.

By the way, it is not always necessary to change components after a crash, sometimes it can simply
disassemble the phone and place the components in their proper places, as the fall may have
their displacement or detachment. Another thing is if the Truedepth camera doesn’t work because of
cracks and other external, visible to the eye, damage.
If Face ID doesn’t work and nothing helps
If you have tried all the tricks described above and also performed forced
reboot, you can still try another method – DFU mode. It helps in cases where
the phone does not respond to touch at all, freezes and is slow. It is easy to get into DFU mode
to get it, just connect your Phone to a laptop or computer running iTunes. Once it’s
the computer detects, the recovery process starts. This can help when Face ID doesn’t work on the iPhone
due to a software bug. You can read how to switch your phone to DFU mode here

Face ID doesn’t work after replacing the display

No one is protected from unprofessional intervention of repair shops, where they don’t know what
they do, so it happens that Face ID or TrueTone doesn’t work after replacing the screen. You need
take the utmost care when selecting a service centre to provide
service level and have positive reviews. Here are just a few of the criteria by which
you should get your bearings:
– the service has quality spare parts in stock so that the customer does not have to wait weeks for
handling of repairs
– service is dedicated to the most difficult fixes possible, including those where Face ID on
iPhone X or other models does not work
– services include tasks such as replacing displays, motherboards, connectors, batteries
etc.
All of these are handled by the specialists at i-Fix Servis and they provide full service and warranty

Summary

Based on all of the above, we conclude:
– if Face ID is not working on your iPhone, you can try to fix the problem
themselves
– never disassemble the iPhone after contact with liquid or dry it with a hair dryer, in rice and
in other ways. It is always necessary to seek the help of professionals!
– Face ID doesn’t work outdoors – take off your hat, glasses and other accessories that get in the way
facial recognition
– I-Fix Service is always there for you if Face ID doesn’t work on your iPhone

Please do not hesitate to contact us if you have any additional questions. contacts can be found here

You can follow us on Instagram

Cracks and scratches on the screen, and a touch that doesn’t work or is only partially functional, are all common problems Apple device owners experience. Accidentally dropping your smartphone can cause you to be forced to go to a repair shop for repairs without delay. How long does this task take, how to replace the display, and what tools do technicians use in their work?

Replacing the iPhone X display: where to start?

The repair is not difficult if you have previous experience with Apple technology. In the first stage you will need a screwdriver Pentalobe – use it to unscrew the screws at the bottom of the phone. To further open the iPhone X, you must first carefully heat the device around the perimeter with a hairdryer – from the factory, an adhesive is used inside the perimeter of the structure to ensure resistance to the ingress of dust and moisture. However, if the iPhone gets too hot, it can damage internal components, so it’s important to act quickly, and with the utmost care.

After removing the adhesive, open the phone carefully. For this, a special pick with a thin, sharp blade and a plastic spatula are used.

Important! iPhone X can only be opened from left to right, otherwise the display cables or the headphone flex cable could be damaged.

The cover panel of the display connectors is fitted with 5 screws (2 of them are different lengths, so it is important not to mix them up). The screws are removed with a 3-point screwdriver. After removing the protective cover, the battery is disconnected from the motherboard. Skipping this step may cause a short circuit on the motherboard. Then the connectors and the headphone flex cable are carefully disconnected from the motherboard.

Important! Even the slightest carelessness can damage the flex cable of the headset. Due to this, the Face ID and True Tone feature will not be available in the future, even if this feature is replaced by a new part. Face ID and True Tone only work with the original headphone flex cable that is paired to the processor.

The protective cover of the flex cables of the display and the flex cable of the handset must be unscrewed slowly and with a good quality magnetic screwdriver. After all, without it, your screwdriver can slip and damage not only the display and headphone cables, but also break off part of the motherboard or puncture the battery insulation, which can cause the lithium to ignite if oxygen gets inside.

Important features related to iPhone X display repair.

The introduction of True Tone technology has become another important feature on all new iPhone models. After the display is replaced, this feature will not work even if the original parts – the display – are used. This is due to the fact that each display from iPhone 8 and above is designed for the specific phone on which it is mounted from the factory.

To restore True Tone, you need a special programmer that reads the data from the original display and transfers it to the new display.

In general, it is quite difficult to replace the display on these iPhones separately. This task requires not only experience and knowledge of the basic details of repairing Apple devices, but also the need to own special equipment to make the repair go correctly. Trying to save money on professional service often leads to serious damage to important components, such as screen smudges, or the operation of basic features like Face ID and True Tone may be disrupted, or the display may not fully adhere to the body of the phone after replacement. That’s why it’s best to have the repair done by experts – only then can you get the quality guarantee you need and, most importantly, a fully functional iPhone after the repair.

If you still decide to replace the display yourself, you can purchase it from us by contacting us via email at info@i-fix.cz

If you want to entrust us with this work, then here you will find repair price list.

Original spare parts are guaranteed for 1 year, non-original parts for 6 months.

If you have any questions, please do not hesitate to contact us. contacts can be found here

How to remotely disable Find iPhone (remove from iCloud account)

1. During the operation of the device on which you want to cancel Find iPhone, must be turned off.
2. After following the instructions below, the new owner should not turn on the device in the usual way and connect to the Internet, as the Find iPhone feature will automatically reactivate.

To avoid this, immediately after following the instructions below, the new owner must do a restore of the device via iTunes on their PC.

Delete the Find iPhone online feature via iCloud.com

The easiest and most convenient way.

1. On your PC, go to icloud.com and log in to your account (Apple ID)

2. On the icloud.com home page, select Find iPhone

3. Tap All devices.

4. Select the device you want to delete and click the small cross to the right of it.

5. Confirm that you want to disconnect your device from Find iPhone.

How to deactivate Find iPhone (remove iCloud) from another device

If you have any other Apple devices, you can turn off Find iPhone on them as well.

In this case:

1. Open the Find iPhone app on your device (in our case, it’s an iPad)

2. A list of your devices will appear on the left. Similar to icloud.com, offline devices are shown in grey.

3. On the device you want to remove, swipe from right to left, release, and confirm your choice by pressing the red Delete button.

4. Confirm the action.

If you have any additional questions, please do not hesitate to contact us. contacts can be found here

You can follow us on Instagram

iPhone won’t turn on

iPhone won’t turn on? Black screen – what to do in this case…?

Your iPhone won’t turn on? If your iPhone won’t turn on and the apple is lit up, or the screen is completely black and the iPhone doesn’t respond to button presses, there is a solution! Both of these problems can happen to any iPhone user, dropping the device on the floor is not a requirement. You can read about what to do if your iPhone won’t turn on in the following article. It is often possible to solve the above problems on your own without visiting a service center and the associated financial costs.

Perform a hard reboot

The first thing you can do if your iPhone won’t turn on is to try a forced (“hard”) reboot. This procedure can get your iPhone out of recovery mode, which the device may have inadvertently gotten into, and which may simply delete the software and all of your data on your iPhone. Forced restart is performed differently for different models

iPhone models

On iPhone 5S, iPhone 6, iPhone 6S and older:

Simultaneously press and hold the Home Button and ON/OFF button (located on the side or top of the device, depending on the iPhone model) for 15 seconds until the Apple logo appears on the display.

On iPhone 7 and iPhone 7 Plus:

Simultaneously press the Volume Down button and hold the ON/OFF (side) button for about 15 seconds until the Apple logo appears.

On iPhone 8/8 Plus, iPhone X and later:

Click and immediately release the volume up button. Next, press and immediately release the volume down button. Then press and hold the ON/OFF power button for 15 seconds until the Apple logo appears.

Remember how to force restart your device! In most cases, it can help with similar glitches that can happen on your iPhone!

A forced restart is completely safe and will not erase or lose any data from your iPhone.If a hard reboot doesn’t help, try another option:

Connect your iPhone to the charger. iPhone often won’t turn on and shows no signs of life, due to the fact that its battery is completely drained. So connect your iPhone to a charger and let it charge for an hour. Here are some important tips to keep in mind:

● Preferably use original or tested and quality chargers

There have been cases where an iPhone has shut down due to a dead battery, but not charged due to a damaged charging adapter or cable. Make sure the charger and cable are in working order.

● Charge your iPhone with electricity.

Often users charge the iPhone from the USB port with the help of a computer. But because of the old battery in the smartphone and the low capacity of the current supplied from the USB interface of the computer, the battery simply does not charge.

● Check if the connector is not dirty.

Sometimes charging will not start due to a heavily soiled Lightning connector. So check the charging port. If it is dirty, clean it gently, for example with a toothpick. How to tell if your iPhone has really started charging?

If, after connecting the device to the charger, the battery and cable logo does not appear on your iPhone’s display and it still asks to connect to the charger, the battery is not charging and the cable or adapter is not working. Therefore, you must use another charging accessory.

If the battery symbol appears on the screen, the iPhone is charging successfully. You should only start worrying if this logo is displayed unchanged for more than 30 minutes. In this case, you need to try replacing both the charging adapter and the cable again.

Connecting iPhone to iTunes in recovery mode

If neither charging nor a hard reboot can turn on your iPhone, you need to try putting your device into recovery mode. Here we must stress that system recovery with data loss may not always be necessary.

The first step is to try to get your iPhone back to a working state with the help of a software update. This method has already saved thousands of iPhones without losing user data. Therefore, we strongly recommend using it initially:

Step 1. Connect your iPhone to your computer with a USB cable and launch iTunes (Finder window in macOS Catalina).

Step 2. Put your iPhone into recovery mode and select the option to update (not restore!)

Note: iPhone must be connected to the computer using a USB cable.

● On iPhone 6s, iPhone 6, iPhone 5s and older.

Press and hold the Home Button and ON/OFF button simultaneously for about 20 seconds until the iTunes logo (the laptop logo on iOS 13 devices) appears.

● On iPhone 7 and iPhone 7 Plus, press and hold the Volume Down button and the ON/OFF button at the same time for about 20 seconds until the iTunes logo appears (Notebook logo on iOS 13 devices).

● On iPhone 8/8 Plus, iPhone X and later.

Press and immediately release the volume up button.

Press and immediately release the volume down button. Then press and hold the ON/OFF button for about 20 seconds until the iTunes logo (the laptop logo on iOS 13 devices) appears.

Read more about Recovery Mode here.

Step 3. Once the update is successful, the system will boot and then click “Eject iPhone” in the iTunes window.

Step 4. Restart iPhone. To do this, just hold down the ON/OFF button. You can also do a forced restart using the method described above.

As a result of this operation, your iPhone can be turned on and will work as before without the need to reset the device.

Restore iPhone via iTunes

If the iPhone won’t turn on even after connecting to the computer and then updating, then only a system restore will help. In most cases, a system restore means deleting all data from the device. You will only be able to get your data back if a current backup is available on iCloud or iTunes.

For instructions on how to restore your iPhone via iTunes, see here

If all options fail and none of the above methods helped to get your device up and running, it means that your iPhone is physically damaged and you need to contact a service center.

Why won’t the iPhone turn on?

1. The most common reason is a faulty battery that prevents the iPhone from turning on. If you’ve noticed your iPhone draining quickly before, shutting down at 10-30% charge, shutting down in freezing cold weather, or any other similar anomaly, then the problem is definitely in the battery.

The exchange will help!

You can view the battery replacement price list for your iPhone model here.

2. Power controller failure is another very common cause of iPhone failure. The symptoms before failure are similar to a dead battery-accidental shutdown, overheating, etc.

Replacing the chip is relatively inexpensive. The power controller or other microchip associated with the charging process is replaced and can be done at any professional service centre.

3. Failure of other components. iPhone may not turn on due to failure of other components, most commonly after the smartphone is dropped or moisture intrusion. The exact cause can only be determined during professional diagnostics at a service center.

If you have any additional questions, please do not hesitate to contact me. contacts can be found here

You can follow us on Instagram

Replacing the rear glass on iPhone 8, iPhone SE (2020), iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, iPhone XS MAX, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13 mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone 15, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 15 Plus, iPhone 16, iPhone 16 Pro, iPhone 16 Pro Max, iPhone 16 Plus.

This problem can be encountered by owners of iPhone models starting with the iPhone 8. If you use the phone without protecting the back, the glass becomes very vulnerable.

Replacing the back glass on iPhones is quite a chore if you do it by hand. That’s because the glass is “hard” glued to the iPhone and when you manually peel it off, it starts to break and can seriously damage things like the iPhone housing, wireless charging, side button flex cables, or charging connector, which ultimately leads to higher overall repair costs.

In the event of a broken back glass, the official Apple service center suggests replacing the iPhone with a new device for a huge additional fee. So what to do in this situation?

You must choose a non-authorised service centre where the rear glass will be carefully replaced without damaging the internal components. When repairing the iPhone XS back cover glass, the technician will usually disassemble the iPhone and heat the glass vigorously with a hair dryer. However, this is an outdated technology that risks leaving imperfections and small leaks around the perimeter of the cover after replacement. Also, because the iPhone has to be completely disassembled for this procedure, it takes quite a long time to replace the back glass this way.

Our service has such an option – replacement of the rear glass on iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, iPhone XS Max, iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max on specialized equipment using laser technology. The laser trims the back glass according to predetermined parameters, completely eliminating the possibility of damaging the housing and components inside your iPhone.

Prices for iPhone back glass replacement:

iPhone 8 / SE – 1700,-

iPhone 8 Plus – 1800,-

iPhone X – 1800,-

iPhone XR – 1800,-

iPhone XS – 1900,-

iPhone XS Max – 1500,-

iPhone 11 – 1700,-

iPhone 11 Pro – 1900,-

iPhone 11 Pro Max – 1900,-

iPhone 12 mini – 2200,-

iPhone 12 – 2200,-

iPhone 12 Pro- 2200,-

iPhone 12 Pro Max – 2400,-

iPhone 13 mini – 2500,-

iPhone 13 – 2500,-

iPhone 13 Pro- 2800,-

iPhone 13 Pro Max – 3200,-

iPhone 14 – 2900,-

iPhone 14 Pro- 2900,-

iPhone 14 Pro Max – 3000,-

iPhone 14 Plus – 3000,-

iPhone 15 – 2900,-

iPhone 15 Pro- 2900,-

iPhone 15 Pro Max – 3000,-

iPhone 15 Plus – 3000,-

iPhone 16 – 2900,-

iPhone 16 Pro- 2900,-

iPhone 16 Pro Max – 3000,-

iPhone 16 Plus – 3000,-

Full price list can be found here

If you have any additional questions, please do not hesitate to contact me. contacts can be found here

You can follow us on Instagram

Today we’ll look at what to do (or not do) when your iPhone won’t charge. In this article, we will look at the possible reasons and try to find a solution for each of them.

If your iPhone has stopped charging, read this article to the end. We’re sure you’ll find some of the tips below helpful.

As you probably already understand, there is more than one reason why an iPhone may not charge. We’ve gathered the most common reasons below. Let’s start with the simplest ones and then move on to the more serious causes.

Follow the advice given and try to absorb what you have read. I’m sure some of the tips will help you charge your iPhone.

Reason 0: Software (firmware) error

Believe it or not, in most cases, the reason your iPhone won’t charge is because of the software (firmware), not the hardware. If you didn’t know, inside the iPhone there is a controller (a chip on the motherboard) that is responsible for charging the battery. This controller is controlled by software commands.

So when you connect the cable to the iPhone, power is not supplied directly to the battery, but first to the motherboard with the controller, which is then controlled by a program that is part of the phone.

So what did we actually find out? The fact that the iPhone’s software component detects when a power source is connected to the phone, which instructs the driver to start charging. If the software doesn’t respond (e.g. the phone is stuck), no command will be issued and your iPhone won’t charge.

A hard reset of the device usually helps resolve this issue. To do this, hold down the Home and Power buttons simultaneously for at least 30 seconds.

• If you need to restart your iPhone X or 8 – read this article

Reason #1: Charging port contamination

80% of the population carry their phones in their trouser pockets. We don’t know about you, but we try to clean the dirt out of our pockets regularly, but there’s always some left behind. Plus, this dirt (dust, lint, hair, etc.) tries to get into every nook and cranny on your iPhone.

Just imagine, this is the first and most common reason why an iPhone may not charge! You can’t even imagine what a pile of dust and dirt can get into your iPhone’s charging slot!

The accumulated compressed dust does not allow the cable plug to insert normally into the connector hole, which leads to the problem. Don’t believe us?

Try cleaning it yourself! Take a wooden toothpick and thoroughly clean the accumulated debris from the charging connector. Try to clean the charging hole in both corners. However, be careful not to damage the contacts!

You may be surprised to see how much dirt you have managed to remove. Next, blow out the connector and connect the cable to charge. If the battery in your iPhone is very low, it can take up to 15 minutes for the first signs of life to appear.

Reason 2: The USB port is faulty

If you’re trying to charge your iPhone via the USB port on your PC, but the iPhone won’t charge, the first thing you should do is check if this or that port is even working. For example, there are several USB connectors on our Windows work laptop that don’t charge the iPhone at all. We don’t know what this is related to, but the phone simply won’t charge. It appears that the 5V power needed to charge the battery in the iPhone is not being supplied to these USB ports.

Now we will list some information to understand the principle of battery charging in iPhone:

1. The usual USB port on a PC or laptop has a voltage of 5V and an output current of 0.5A
2. Standard iPhone charging with an adapter from a power outlet has a voltage of 5V and an output current of 1A
3. Standard iPad charging with an adapter to the socket has a voltage of 5V and an output current of 2A

Check it out. If this is the case, try a different USB port or connect the iPhone to normal 220V. If the charger also fails to charge your iPhone, read on for another possible reason.

Reason #3: Charger (adapter) / faulty cable

As is generally known, genuine Apple chargers are quite expensive. For this reason, many people buy iPhone charging components on AliExpress and similar platforms in China.

!!! We strongly advise against it! In no case DO NOT buy or use cheap, Chinese, non-original adapters!!!

According to customer reviews and personal experience, we can assure you that sooner or later Chinese chargers will affect the charging and battery condition and may cause the phone to malfunction altogether! You yourself must realize that cheaper does not mean better and that in the end, replacing the battery or charging components may cost you several times what you would normally pay for a genuine Apple charger.

So, if your iPhone won’t charge using a Chinese (non-original) charger, try buying, or borrowing from someone to try out, an original Apple adapter.

However, if you have an original and genuine Apple adapter and your iPhone still doesn’t charge, it’s your turn to test the Lighting cable. From personal experience, we can tell you that even the original cables that come with your new iPhone fail.

Original cables are inherently quite fragile. If you don’t use them carefully enough, then the outer sheath often gets damaged, but also the conductive “cores”. For example, we recently threw away an original cable because it started charging the iPhone at no more than 60%…

“This cable or accessory is not supported …”

Probably some of you have already encountered this message “This cable or accessory is not supported, so its operation with this iPhone is not guaranteed to be reliable.” There could be several reasons for this and we will consider them in a separate article.

We can say only one thing, starting with iOS 7, Apple has taught its devices to recognize the originality of USB cables.

As previously mentioned, a special chip is installed in the plug of the Lighting cable that allows the iPhone (iPad) to recognize the origin of this cable. The Chinese, of course, have learned to make fake Lighting chips, but with the release of iOS 7 Apple has changed the rules of the game again.

Therefore, try to use only and exclusively original cables.

Use only the original Lighting cable and original Apple adapter. However, if even this doesn’t work and your iPhone still won’t charge, one of the components in your iPhone is probably defective. Read about it below.

Reason 4: iPhone battery

Any battery is a consumer product. This means that batteries do not last forever and require regular replacement. We recently replaced the battery on a MacBook Air, at the stage where the battery was absolutely no longer responding and charging was no longer possible, the MacBook could not be used without the cable.

It can also happen with an iPhone, although it’s relatively rare. Four- to five-year-old phones are especially prone to this diagnosis, which manifests itself as a gradual battery failure and degradation of fitness, up to complete battery failure, where in extreme cases the iPhone cannot be turned on at all.

Replacing an iPhone battery is not complicated, but it requires some experience, tools and skills. If your device is brand new or newer, we don’t think the battery is the problem. We often have people come to us who have been charging their devices with chargers of unknown origin, and therefore have had battery or charging issues in the future.

In this case, the charger or power controller will usually fail. But more on that below, see reason number 5.

Reason 5: iPhone components are faulty

The final reason why the iPhone won’t charge is because of a failure of internal components. Yes, and don’t be surprised, it’s quite common! Most often, the battery or power controller will fail. You can only find out exactly what has failed after a service diagnosis.

Many people complain that their iPhone doesn’t charge at all, or quickly loses % charge, is too hot, or won’t accept a cable, all signs of a faulty iPhone power/charging controller. We will describe the theory behind replacing iPhone power and charging components in detail in a separate article.

If you need to explain it simplistically, then basically the U2 controller is a chip (microcircuit) on the iPhone board that can be replaced (re-soldered) with a new chip. In service centres, this procedure is commonly performed and the cost of repair ranges from 1 200 to 4 500 crowns (depending on the model).

We can’t tell you right away, remotely and without a physical diagnosis, exactly what has failed in your case. Therefore, if your iPhone is experiencing charging problems, poor battery life, etc., you should visit a service center right away. After replacing the power controller or battery, it is always a good idea to check the overall performance and battery life of your iPhone.

Even new iPhone batteries (again of Chinese origin) can be faulty, and may not even charge.

Or the technician who repaired your iPhone accidentally replaced a part but didn’t find the real problem that caused you to take your phone in for service.

Therefore, ask the service center to connect your iPhone to a power source and make sure that the phone turns on and the charging indicator gets at least a few percent.

In any case, write in the comments which method helped you. If the iPhone still does not charge, write to us about it and we will try to find another solution for you. We’re always in the same place, so come in and ask.

If you have any additional questions, please do not hesitate to contact me. contacts can be found here

You can follow us on Instagram

In this text, we will describe the procedures and combinations that you can use to hard restart your phone, activate recovery mode or DFU mode, on iPhone 8, 8 Plus, X, Xs, Xs Max 11, 11 Pro, 11 Pro Max or XR. After all, these procedures have changed since the days of iPhone 7, 7 Plus!

No matter how you hold your iPhone 8, 8 Plus, X, Xs, Xs Max, 11, 11 Pro, 11 Pro Max or XR in your hands, you’ll never have to guess what you need to press to hard reboot your iPhone or put it into DFU recovery mode to update or reinstall Firmware on your device. That’s probably one of the reasons that brought you to our site.

Now we’ll show you how to force a hard reboot, activate recovery mode or DFU mode on iPhone 8, 8 Plus, X, Xs, Xs Max, 11, 11 Pro, 11 Pro Max or XR.

Before we dive into the details, let’s take another look at the button names using iPhone Xs as an example. Now, the power/lock button is called the Side button. We’ll continue to use this term to refer to it. The volume up plus (+) / volume down minus (-) buttons remain unchanged.

The circular button, or Home button, that you were used to on earlier models hasn’t appeared on iPhone X for obvious reasons, but it’s still there on iPhone 8/8 Plus. Still, the button combinations for both iPhone models are identical to those on the X, Xs, etc.

How to hard restart iPhone 8, 8 Plus, X, Xs, Xs Max, XR, 11, 11 Pro, 11 Pro Max

Let’s say your iPhone freezes, or some features start to fail, or it doesn’t turn on at all. To return it to a working state, you need to perform a forced restart. Forget (if you knew before) any other button combinations and follow the exact step-by-step instructions below.

The new iPhone restartbutton combination requires a little more manual dexterity. If it doesn’t work the first time, try again.

STEP 1 – Press and quickly release the volume up button plus (+). Then press and quickly release the volume down button minus (-).

STEP 2 – Now hold down the side button until the apple appears on the iPhone screen.

You must press the buttons in this exact combination!

So much for the hard reboot. Didn’t it work? Try to be more nimble and try again!

Recovery mode on iPhone X and older

Now let’s take a look at the options for when to activate Recovery Mode on iPhone X and older models. We will do this as follows:

STEP 1 – You must have the latest version of iTunes installed on your computer.

STEP 2 – If iTunes is running, close it. Connect your iPhone to your computer with a cable and start iTunes.

STEP 3 – Now follow the same procedure as in the previous section. Press and release the volume up button plus (+), then press and release the volume down button minus (-)

STEP 4 – Press and hold the side button until a picture of the cable and iTunes icons appear on the iPhone screen. If the screen first shows an apple, don’t be surprised.

Hold the side button until you receive confirmation that recovery mode has been successfully activated.

STEP 5 – A corresponding message should appear in the iTunes window offering to Restore (with all data loss) or Update (without data loss) the iPhone firmware.

For iPhone X and older devices in recovery mode, that’s it, now we move on to the most difficult DFU mode.

DFU mode on iPhone Xs,Xs max, XR, 11, 11 Pro, 11 Pro Max

We have reached the DFU (Device Firmware Update) mode. If a forced reboot didn’t help and recovery mode is not activated, DFU mode is the last option you can try at home without service.

When restoring the device in DFU mode, the iOs operating system will be installed on the phone “from scratch“. All information stored on the phone will be lost.

DFU mode can help in cases where the iPhone goes into a cyclic loop during the boot phase or periodically displays a blue/red “death” screen.

It is highly recommended that you read all the steps below carefully to understand the order in which and for how long you need to press this or that button. To enter DFU mode on iPhone 8, 8 Plus, X, Xs, Xs Max, XR, 11, 11 Pro, 11 Pro Max you need to do the following:

STEP 1 – Connect your iPhone to your computer and launch iTunes. Make sure you have the latest version of iTunes.

STEP 2 – Press and release the plus (+) volume up button, then press and release the minus (-) volume down button, then press and hold the side button until the screen disappears.

STEP 3 – Press and hold the side button and the volume down (minus) button simultaneously for 5 seconds.

STEP 4 – Then release the side button while holding down the minus (-) button for another 15 seconds.

STEP 5 – A message should appear in the iTunes window that the iPhone has been detected in recovery mode. The screen on the iPhone should remain off.

STEP 6 – If nothing happened or something appeared on the iPhone screen after the above steps, you miscalculated the time in seconds. So go back to STEP 1 and try again.

That’s all. In fact, activating DFU mode on iPhone Xs and newer is the same as on older iPhone models, but the restart and recovery mode is already new.

If you have any additional questions, please do not hesitate to contact me. contacts can be found here

You can follow us on Instagram